AG 5500
System Administration 79
2. If you want to enable the billing records “mirroring” functionality for credit card
transactions (and you have purchased the appropriate product license), click on the check
box for
Enable CC/PMS Mirroring.
3. Enter the property identification code in the Property ID field.
4. Enter the communication parameters for the primary server that is to be used for
mirroring, including:
z Primary IP
z URL
z Secret Key
5. Repeat Step 4 for the secondary server (if any) and all carbon copy servers.
6. Define the “fail-safe” provisions, including:
z Retransmit Method – Alternate, or do not alternate.
z Number of Retransmit Attempts – This tells the system how many times it should
attempt to retransmit billing records before suspending the task.
z Retransmit Delay – This specifies the time delay between each retransmission.
7. Click on the Submit button to save your changes, or click on the Reset button if you want
to reset all the values to their previous state.
The AG 5500 and the “mirror” servers must use the same secret key.
ag5500_userguide.book Page 79 Tuesday, June 5, 2007 7:31 PM
To Next Page
