NORAM 65ET GRADER
2-5
General Information
2
Component Identification and Locations
COMPONENT IDENTIFICATION AND LOCATIONS
Protective Shield
The engine and transmission are enclosed to protect personnel from hot and moving parts. An
additional guard encloses the cooling fan.
Engine access doors are located on each side of the engine
cover. A lock is in the handle
(1). Turn the handle
clockwise 180° to unlatch and counter-clockwise 180° to
latch.
DO NOT operate machine until thoroughly familiar with the location and operation
of all controls.
DO NOT operate motor grader with engine enclosure removed or access doors
open and unlatched. DO NOT operate with fan guard removed or broken.
To Next Page
Loading...