NORAM 65ET GRADER
4-4
General Information
1
4
Lubrication and Maintenance - Grader Components
GENERAL INFORMATION
Proper machine operation depends upon a properly maintained machine. This section provides a list
of items to be checked, inspected or changed periodically.
NOTE: Section 4 includes machine lubrication and maintenance instruction but excludes engine
lubrication and maintenance instruction. Refer to Section 5 for lubrication and maintenance
instructions for the Cummins engine, and Section 6 for lubrication and maintenance instructions
for the CAT engine.
When performing maintenance, always park motor grader on level ground with the moldboard on the
ground and implements pinned in place or lowered to the ground.
Dispose of all used fluids and filters according to federal, state and local regulations.
Never grease, service or adjust machine with engine running, except as specified
in this manual or the service and repair manual.
To Next Page
Loading...