NorAM 65 E T4 FINAL - Every 50 Hours or Weekly

NORAM 65ET GRADER
4-18
Every 50 Hours or Weekly
1
4
Lubrication and Maintenance - Grader Components
EVERY 50 HOURS OR WEEKLY
Front Axle Drag Link - Grease
One fitting (1) on each side of front axle. 2-4 shots each.
Moldboard Lift Cylinder Balls - Grease
One fitting (1) on lower end of each lift cylinder. 2-4 shots
each.
Circle Shift Cylinder Balls - Grease
One fitting (2) on each end of circle shift cylinder.
2-4 shots each.
Draw Bar Pivot Pins - Grease
One fitting (1) on each end of the horizontal pin and one
fitting
(2) is located on top of the twist pin. 2-4 shots
each.
1