NORAM 65ET GRADER
Table of Contents 1
NORAM 65ET GRADER
TABLE OF CONTENTS
SAFETY
Safety Messages ....................................1-1
Safety Symbol Explanation .................. 1-2
Safety Decal Locations .........................1-6
GENERAL INFORMATION
Intended Use .........................................2-1
Introduction to this Manual .................2-1
Orientation ............................................2-2
Machine Description .............................2-2
Identification Numbers ........................2-3
Component Identification and
Locations .......................................... 2-5
Electronic Display ...............................2-28
OPERATION
Mounting and Dismounting ................. 3-1
Daily Pre-Starting Inspection .............. 3-1
Rollover Protective Structure (ROPS) .3-3
Driving the Machine ............................. 3-8
Moldboard and Implement Operation 3-11
LUBRICATION AND MAINTENANCE -
G
RADER COMPONENTS
Safety Messages .................................... 4-1
General Information ............................. 4-4
Accessing Lubrication and
Check Points .................................... 4-7
Maintenance Intervals ....................... 4-11
Every 10 Hours or Daily ..................... 4-13
Every 50 Hours or Weekly ................. 4-18
Every 100 Hours ................................. 4-22
Every 250 Hours or Monthly .............. 4-24
Every 500 Hours or 3 Months ............ 4-27
Every 500 Hours or 6 Months ............ 4-31
Every 1000 Hours or 6 Months .......... 4-34
Every 2000 Hours or 1 Year ............... 4-37
When Required ................................... 4-41
LUBRICATION AND MAINTENANCE -
C
UMMINS TIER 4 FINAL
General Information ............................. 5-1
Maintenance Intervals ......................... 5-3
Every 10 Hours or Daily ....................... 5-4
Every 250 Hours or Every 3 Months ... 5-7
Every 500 Hours or Every 6 Months ... 5-8
Every 1000 Hours or 1 Year ............... 5-11
Every 2000 Hours or 2 Years ............. 5-12
When Required ................................... 5-13