NORAM 65ET GRADER
4-24
Every 250 Hours or Monthly
1
4
Lubrication and Maintenance - Grader Components
EVERY 250 HOURS OR MONTHLY
Universal Joints (Drive Shaft) - Grease
One fitting (1) on the universal joint at each end of the
drive shaft. 1-2 shots each.
One fitting
(2) on rear end, slip joint, of drive shaft. 2-4
shots.
Rear Axle Housing - Check Oil Level
Remove fill plug (1) on rear axle center housing. Oil level
should be even with bottom of hole. Add oil as necessary.
To Next Page
Loading...