NORAM 65ET GRADER
6-8
Every 50 Hours or Weekly
1
6
Lubrication and Maintenance - CAT Tier 4 Final
Fuel Tank Water and Sediment - Drain
Fuel quality is critical to the performance and to the service life of the engine. Water in the fuel can
cause excessive wear to the fuel system. Condensation occurs during the heating and cooling of fuel.
The condensation forms as the fuel passes through the fuel system and returns to the fuel tank. This
causes water to accumulate in the fuel tank. Draining the fuel tank regularly and obtaining fuel from
reliable sources can help to eliminate water in the fuel.
1. Drain fuel tank water and sediment by loosening
the drain plug (1) on the bottom of the fuel tank.
Loosen the plug enough so any water will drain
out, then, retighten plug.
2. Refer to the Engine Operation and Maintenance
Manual supplied with the machine for engine
maintenance information.
NOTE: Collect drained fluid in a suitable container
and dispose of in accordance with local regulations.
To Next Page
Loading...