NORAM 65ET GRADER
2-15
General Information
2
Component Identification and Locations
Seat
Seat Adjustments
The seat should be adjusted before operating the machine so all controls are easily reached and the
operator is comfortable with good visibility.
1. Height Adjustment - Pull out to lower seat. Push in
to raise seat.
2. Fore/Aft Adjustment - Lift lever to move seat
assembly forward or rearward.
3. Seat Back Angle - Lift lever to adjust angle of seat
back.
4. Lumbar Back Support - Rotate thumbwheel to
increase or decrease lumbar support.
5. Arm Rest Angle - Rotate spindle to change angle of
arm rest.
To Next Page
Loading...