EasyManua.ls Logo

Nord Drivesystems NORDAC FLEX SK 215E Series - Page 244

Nord Drivesystems NORDAC FLEX SK 215E Series
284 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NORDAC FLEX (SK 200E ... SK 235E)Users Manual for Frequency Inverters
244 BU 0200 en-3118
Device type SK 2xxE…
-551-323- -751-323- -112-323-
Size
4 4 4
Nominal motor power
(4-pole standard motor)
230 V
5.5 kW
7.5 kW
11.0 kW
240 V
7 ½ hp
10 hp
15 hp
Mains voltage
230 V
3 AC 200 … 240 V,
±
10 %, 47 … 63 Hz
Input current
rms
1)
23.5 A
29.5 A
40.5 A
FLA
2)
22.5 A
28.5 A
39.5 A
Output voltage
230 V
3 AC 0 … Mains voltage
Output current
3), 4)
rms
1)
23.0 A
29.0 A
40.0 A
FLA
motor mounting
2)
22.0 A
28.0 A
39.0 A
FLA
wall mounting
2)
22.0 A
28.0 A
39.0 A
Min. brake resistance
Accessories
30
20
15
Motor mounting (fan cooling 5), integrated in device)
4)
Max. continuous power / max. continuous current
S1-40°C
5.5kW / 23.0A 7.5kW / 29.0A 11.0kW / 40.0A
Max. permissible ambient temp. with nominal output current
S1
S3 70 % ED 10 min
S6 70 % ED 10 min (100 % / 20 % Mn)
40°C
50°C
47°C
40°C
50°C
50°C
40°C
44°C
44°C
Wall mounting (fan cooling 5), integrated in device)
4)
Max. continuous power / max. continuous current
S1-40°C
5.5kW / 23.0A 7.5kW / 29.0A 11.0kW / 40.0A
Max. permissible ambient temp. with nominal output current
S1
S3 70 % ED 10 min
S6 70 % ED 10 min (100 % / 20 % Mn)
45°C
50°C
50°C
45°C
50°C
50°C
45°C
47°C
47°C
General fuses (AC) (recommended)
slow-blowing
35 A
50 A
50 A
Isc
6)
[A]
UL fuses (AC) permitted
Class
10 000
65 000
100 000
Fuse
CC, J, R, T, G, L (300 V)
x 60 A 60 A 60 A
CB
7)
(300 V ) x
60 A 60 A 60 A
1) Note derating curve ( Section 8.4.4 "Reduced output current due to mains voltage").
2) FLA Full Load Current, maximum current for the entire mains voltage range as stated above (200 V 240 V) according to UL/CSA
3) FLA (S1-40°C)
4) SK 21xE and SK 23xE devices: For use of safe functions (functional safety: STO and SS1) the restrictions regarding the permissible temperature
range according to BU 0230 must be noted.
5) Fan cooling, temperature-controlled: ON= 55°C, OFF= 50°C,
After-run time when 50°C limit undershot and enable removed: 2 minutes
6) Maximum permissible mains short circuit current
7) "Inverse time trip type“ according to UL 489
Pos: 71 4 /Allg emein/ Allg emeing ültig e Mod ule/---------Sei tenumbr uch ko mpakt --------- @ 13\mod_1476369695906_0.docx @ 2265495 @ @ 1

Table of Contents

Other manuals for Nord Drivesystems NORDAC FLEX SK 215E Series

Related product manuals