nord NORDAC SK 200E - External Brake Resistor SK BRE4; External Brake Resistor Dimensions

2 Mounting and Installation
BU 0200 GB Subject to technical alterations 27
2.3.2 External brake resistor SK BRE4-…
The external brake resistor is intended for the feedback of energy, such as occurs in cyclical drives or lifting
equipment. Here, it may be necessary to plan for the exact brake resistor required.
For installation, an M20 screw connection with an adapter for M25 are supplied. The connecting wires for
the brake resistor are fed through this into the connection unit.
The brake resistor is attached to the side of the connection unit using 4 suitable M4 x 10 screws.
2.3.3 External brake resistor dimensions
Resistor type Size A B C
Fixing dimensions
D e

SK BRE4-1-100-100
SK BRE4-1-200-100
SK BRE4-1-400-100
Size I
150 180 60 83 32 4.3
SK BRE4-2-100-200
SK BRE4-2-200-200
Size II
255 180 60 83 32 4.3
All dimensions in mm
A
B
C
d
e