3.4 External Technology Unit
BU 0200 GB Subject to technical alterations 71
3.5 Technology Unit Overview
External Technology Units enable the expansion of the scope of functions of SK 200E frequency inverters.
Users have access to both communication modules and mains units or an I/O expansion.
Modules with connection terminals or M12 system connectors are available as options.
According to the installation location, modules with protection class IP55 or IP66 are available. These can
be installed directly on the SK 200E or independent of the SK 200E with an appropriate wall-mounting kit.
Each SK TU4-… Technology Unit requires an SK T14-TU-… Connection Unit . The SK T14-TU-BUS is
available for bus modules or the I/O extension. The mains unit or potentiometer modules require an SK T14-
TU-NET Connection Unit.
For the bus modules or I/O extension with integrated system bus an RJ12 socket (behind a transparent
screw-on cover) is also available. This enables communication with other modules or frequency inverters.
With this linkage, all devices can be parameterised with a PC and the NORD CON software.
To Next Page
Loading...
