NORDAC SK 200E Manual
78 Subject to technical alterations BU 0200 GB
3.5.4 DeviceNet module, SK TU4-DEV, ...-M12
DeviceNet is an open communication profile for
distributed industrial automation systems. It is based
on the CANbus system.
Up to 64 participants can be linked to one Bus system.
The transfer rate and the bus address can be set with
the DIP switches.
The bus modules require an external 24V supply, and
are therefore also active in the bus if the frequency
inverter is not connected to the mains supply.
For detailed information, please refer to the Bus
Manual BU 0250.
3.5.5 IO-Extension, SK TU4-IOE, ...-M12
The I/O extension requires an external 24V supply,
and is therefore also ready for operation if the
frequency inverter is not connected to the mains
supply.
For detailed information, please refer to the Bus
Manual BU 0250.
To Next Page
Loading...
