9
8
6
4
98
8
9
98
8. Identify the Right and Left Handlebar Covers
(8, 9), which are marked with “Right” and “Left”
stickers.
Attach the Right and Left Handlebar Covers (8,
9
) around the Handlebar (6) and the Upright (4)
with four M4 x 16mm Screws (98).
9
9. Attach the Seat (15) to the Seat Carriage (11)
with four M6 x 50mm Patch Screws (65) and
four M6 Washers (66) (only two of each are
shown). Note: The Patch Screws and
Washers may be preattached to the under-
side of the Seat.
15
11
65
66
66