Nordson FoamMelt 200 - Thermoplastic Hot Melt Material; Equipment and Material Disposal

Safety
A 1-8
E 2015 Nordson Corporation
All rights reserved
321222_06
Issued 04/2015
A1EN- 02- [XX- SAFE]- 1
NOTE: Always refer to the material manufacturer's Safety Data Sheet
(SDS) or material information sheet before working with any hot melt
material.
S Ensure the work area is adequately ventilated.
S Do not exceed recommended processing temperatures. Doing so
creates a danger to personnel due to decomposition of the material.
Dispose of equipment and materials used in operation and cleaning
according to local regulations.
9. Thermoplastic Hot Melt
Material
10. Equipment and Material
Disposal