Nordson Smart Gun - Specifications

© 2021 Nordson Corporation
7446567-02
3-1
Specications
Section 3
Specications
Item Specication
Distance Traveled Per Valve Needle 0.20 inch (4.97mm)
Facility Ambient Operating Temperature 68˚ F - 75˚ F (20 ˚ C - 24˚ C)
Material Inlet / Outlet / Other Ports for
Smart Gun Applicator
1/2” N.P.T. material inlet port, 1/4” air tubing (main air inlet), 6mm air tubing
swivel to smart gun valve air inlets, 6mm air tubing smart gun valve air inlets
Maximum Fluid Pressure 3,875.0 psi (267.2 bar, 26.7 MPa)
Operating Air Pressure Requirements 1/4 inch or 6mm air line 80 - 100 psi (5.5 - 6.9 bar, 0.6 - 0.7 MPa )
Optimum Operating Pressure <1,900 psi (131.0 bar, 13.1 MPa )
Swivel Torque Refer to Chart 1 (below)
Weight (Approximate) 316 lbs. (143.3 kg)
Average Swivel Torque
0 PSI 500 PSI 1,000 PSI 1,500 PSI 2,500 PSI
0
2
4
6
8
10
12
14
16
N●m
NOTE: The torque is based on a 13.19 LBS/GALLON sealer material density level. Torque values will
vary per application. Contact your Nordson® representative for application specic details.
Chart 3-1 Average Swivel Torque