Nordson Smart Gun - Page 5

© 2021 Nordson Corporation
7446567-02
1-2
Safety
Personal Safety
To prevent injury follow these instructions.
• Do not operate or service equipment unless you are qualied.
• Do not operate equipment unless safety guards, doors, or covers are intact and
automatic interlocks are operating properly. Do not bypass or disarm any safety
devices.
• Keep clear of moving equipment. Before adjusting or servicing moving equipment, shut
o󰀨 the power supply and wait until the equipment comes to a complete stop. Lock out
power and secure the equipment to prevent unexpected movement.
• Relieve (bleed o󰀨) hydraulic and pneumatic pressure before adjusting or servicing
pressurized systems or components. Disconnect, lock out, and tag switches before
servicing electrical equipment.
• While operating manual spray guns, make sure you are grounded. Wear electrically
conductive gloves or a grounding strap connected to the gun handle or other true earth
ground. Do not wear or carry metallic objects such as jewelry or tools.
• If you receive even a slight electrical shock, shut down all electrical or electrostatic
equipment immediately. Do not restart the equipment until the problem has been
identied and corrected.
• Obtain and read Safety Data Sheets (SDS) for all materials used. Follow the
manufacturer’s instructions for safe handling and use of materials, and use
recommended personal protection devices.
• Make sure the spray area is adequately ventilated.
• To prevent injury, be aware of less-obvious dangers in the workplace that often cannot
be completely eliminated, such as hot surfaces, sharp edges, energized electrical
circuits, and moving parts that cannot be enclosed or otherwise guarded for practical
reasons.
• To avoid tipping, ensure Dual IPS Meter Assembly is lagged to the oor with suitable
fasteners prior to being placed into service.