Normstahl SPARK - SPARK and YALE Home App; Maintenance

57
IP2449EN
19.SPARK and YALE Home App
SPARK600SN, SPARK600SC, SPARK1000SN and SPARK1000SC includes already the interface Wi-fi
for YALE Home. This is recognizable because the motor shows on the cover YALE ready
To configure SPARK motors in the YALE Home App, please follow the steps below:
1) Download the YALE Home App from the App store or Google Play store
2) Follow the advice on the App
3) Scan QR code outside the product when prompted
20.Maintenance
Six-monthly maintenance activities
• Check the emergency release is working properly.
• Check the safety devices (if installed) are working properly.
• Check the obstacle detection function is working properly.
• Check the stability of the automation
Disconnect the power supply, 230 V~:
• Lubrication of mechanical parts must be performed with door down.
• Make sure that cable and spring breakage device is in perfect working order.
• Check lift-cable wear.
• Make sure that the cables run smoothly in the drums.
• Periodically grease the hinges, ball-bearings, wheel pins, and torsional springs.
• Check for any obstacles that may hinder the wheels from properly running in the guides.
• To check the correct balancing of the sectional automation.
• Make sure that the overhead sliding structure is firmly fastened to the ceiling and perfectly free
from any defects, bending or buckling.
• Make sure that there are no loose bolts or screws.
• Absolutely avoid making any changes to the hoisting and/or sliding system.
Connect the power supply (230 V~) and check that:
• Limit switches are working properly.
• All control and safety functions are in good working order.