Normstahl SPARK - Product Description; Operating Instructions; Machinery Directive

7
IP2449EN
2. Product description
The automation is suitable for use with balanced sectional doors, side doors and counterweighted
overhead doors (with optional accessory).
3. Operating Instructions
USE: For single-family/multi-family entrances with heavy use.
- The performance characteristics refer to the recommended weight (approx. 2/3 of the maximum
permitted weight). When used with the maximum permitted weight, a reduction in the above
mentioned performance levels can be expected.
- The service class, running times and number of consecutive cycles are merely indicative, having
been statistically determined under average operating conditions and therefore not necessarily
applicable to specific conditions of use.
- Each automatic entrance has variable elements such as friction, balancing and environmental
factors, all of which may substantially alter the performance characteristics or working life of the
entrance itself or its components (including the automatic devices). The installer should apply
suitable safety conditions for each particular installation
4. Machinery Directive
Pursuant to Machinery Directive (2006/42/EC) the installer who automatize a door or gate has the
same obligations as the manufacturer of machinery and as such must:
- prepare the technical file which must contain the documents indicated in Annex V of the Ma-
chinery Directive;
(The technical documentation must be kept and placed at the disposal of competent national
authorities for at least ten years from the date of manufacture of the motorized door);
- draw up the EC Declaration of Conformity in accordance with Annex II-A of the Machinery Directive
and deliver it to the customer;
- affix the EC marking on the motorized door in accordance with point 1.7.3 of Annex I of the
Machinery Directive.