122
/ Feature Operations
Call Restrictions and Overrides
Restrictions
Call Restrictions are used to prohibit certain phone numbers, area
codes, or types of calls from being used on the Norstar system.
These Restrictions can be applied to specific telephones or
telephone lines through Administration programming.
The maximum length of a Restriction sequence is eight
characters. The maximum number of Restrictions allowed in any I
Norstar system is 30.
A call can be prevented by a Restriction placed on either the line or
the telephone set being used. Restrictions applied to a telephone
set affect calls from that telephone set on any line. Restrictions
applied to a line affect calls on that line from any telephone set.
Overrides
An Override is a programmed sequence of digits that bypass an
active Restriction. This enables selected lines and telephones to
make calls that would otherwise be prevented by Norstar system
Administration.
The maximum length of an Override sequence is 14 characters.
The maximum number of Overrides in any Norstar system is
ten.
Overrides applied to a telephone set permit calls on any line from
that telephone set, except where specific Line Restrictions apply.
Similarly, Overrides applied to a line permit calls on that line from
any telephone set, except where-specific Set Restrictions apply.
For another method of overriding Restrictions, see the “Restriction
Passwords” section of this chapter.
Restrictions and Overrides are programmed and applied to
telephones and lines in the “Restrictions” and “Overrides” sections
of Administration programming. For further information, see the
“Restrictions” and “Overrides” sections of the Administration
chapter of this Guide.
System Coordinator Guide
i. -
To Next Page
