Feature Operations I 159
~ :
.,I
.:
..,I, .
I
Answering a call from another telephone in your Pickup group
requires the use of the -Pick-up button or IfeaturelmEj
For complete instructions, see the “Call Pick-up” section of this
chapter.
Calls ringing on a telephone’s private line cannot be picked up from
another telephone in your Pickup group, but any other call (inside
or outside) can be answered.
For another method of answering a call which is ringing at another
telephone, see “Call Pickup (Directed)” in this chapter.
Each telephone in your system can be assigned to a Pickup Group,
or to none, in the “Permissions” section of Administration
programming.
Prime Line
Your telephone can be programmed to automatically select ohe of
the following line types whenever the receiver is lifted or the
m button is pushed:
l
Outside line
l
Intercom line
l
Line Pool
l
None
If an outside line or Line Pool has been assigned as the Prime Line
for your telephone, there is no need to first select an outside line
before making a call or using outside Autodial, Speed Dial or Last
Number Redial. Automatic Outgoing Line Selection will select a
free line if you are not already using your telephone and the Prime
Line is free.
If your telephone has no Prime Line or if the Prime Line is busy,
press an outside line button before using outside Autodial, Speed
Dial, or Last Number Redial.
This feature is controlled by your Installer or Service
Representative in the “Line Access” section of Configuration
programming.
System Coordinator Guide
a..-
To Next Page
