88 / Administration
Explanation of Passwords Overview
From thei 8. Passwards I heading, press lShow to see the
first sub-heading: IRdm i n. password 1 Move between here
and the other sub-heading, LRcstl
Vpsuldl , by pressing
~ or m as required.
From the 1 Rdm i n password (sub-heading, you can change,
create, or erase the Password by pressing the m display
button and following the prompts which appear on the display.
From the [Restr i ct i on pswd 1 sub-heading, you can change,
create, or erase the Password by pressing m, then the
~ display button and following the prompts which appear
on the display.
Notes on Passwords
Administration password
Be sure to write your
password somewhere
that
is safe and
secure. If you lose the password, you cannot enter
Administration programming. In this case, call your Installer or
Service Representative for assistance, as he or she can cancel
your password or create a new one through Norstar Configuration.
Restriction password
For security purposes, it is a good idea to change passwords
periodically, and inform only those who are entitled to use the
password.
SeeIs. Overrides I for an alternate way to bypass call
Restrictions on certain lines or telephones.
The Job Aids chapter of this Guide has an appropriate place for
recording your passwords, but you may not want to record your
passwords in the Job Aids chapter if this Guide is made accessible
to your co-workers. Keep the pages in this Guide blank, and use
them as a master copy. Photocopy the pages and fill in the
duplicates, which can then be kept in a safe place.
System Coordinator Guide
i. -
To Next Page
