Norstar M7310 - Page 89

Feature Operations I93
.
..I :
: :. ..
:
Programming Personal Speed Dial Codes
-
1. P&s IfeaturelFJF
2. Press the Personal Soeed Dial code (71 to 94).
3. Press the phone num’ber to be stored (up to 16 digits).
4. Press the ( button or the IOKJ display button
(M7310 and M7324 telephones).
5. Record the Personal Speed Dial code and the telephone
number on your Personal Speed Dial Card (located on a
pull-out tray beneath your telephone) or in an
appropriate place near your telephone.
Setting Ring Type
1. Press Ifeaturelmm
2. Press q , q , q or q or the ~ display button
(M7310 and M7324 telephones) to choose a suitable
ring type.
3. Press )I (M7208 telephone) or IOK display button
.
(M7310 and M7324 telephones).
- I
The display shows INew ring stored 1
Setting Display Contrast
1. Press Ifeaturelmrl
2. Press q , q , q or q or use the m and /E%iN
display buttons (M7310 and M7324 telephones) to adjust
the contrast to suit the lighting in your workplace.
3. Press the m button (M7208 telephone) or the IOK
display button (M7310 and M7324 telephones) when you
have the correct contrast adjustment.
Setting Ring Volume
1. Press mr]lm[
2. Press either end of the Volume Bar repeatedly until you
reach the desired volume.
Sj;stem Coordinator Guide