Copyright © 2019 Nortek Security & Control LLC
10
Features to Limit False Alarms
For compliance with ANSI/SIA CP-01-2010: Control Panel Standard - Features for False Alarm Reduction, the installer
can set a variety of different options designed to limit occurrences of a False Alarm.
ANSI/SIA CP-01-2010 Features to Limit False Alarms
ANSI/SIA CP-01-2010 2GIG System Feature User Guide
4.2.2.1 Exit Time Exit Delay “Important Concepts”
“Arm the System”
4.2.2.2 Progress Annuciation Exit Delay Announcement “Important Concepts”
“Arm the System”
4.2.2.3 Exit Time Restart Exit Delay Restart “Important Concepts”
“Arm the System”
4.2.2.4 Exit Error Exit Error “In the Event of an Exit Error”
4.2.2.5 Unvacated Premises Auto Stay “Arm the System (Away Mode)”
4.2.3.1 Entry Delay Entry Delay “Important Concepts”
“To Disarm the System”
4.3.2.2 Progress Annuciation Entry Delay Announcement “Important Concepts”
“To Disarm the System”
4.3.2.3 Disarm Disarming Features “Important Concepts”
“To Disarm the System”
4.2.4.1 Control Buttons Keyfob/Remote Arming Mode on
System Not Ready
“Remote Control Devices”
4.2.4.2 Manual Alarms Emergency Alarm Features “Activate a Manual Panic, Fire, or
Emergency Alarm”
4.2.4.3 System Acknowledgment Alert Keyfob Disarming After
Alarm, Keyfob Arm/Disarm
Confi rmation
“Arming the System Using a Keyfob”
“Disarming the System Using a Keyfob”
4.2.4.4 Remote Arming Key Fob Arming “Arming the System Using a Keyfob”
4.3.4.5 Remote Disarming Key Fob Arming “Disarming the System Using a Keyfob”
4.2.5.1 Abort Window Abort Window Dialer Delay “In the Event of a Burglary Alarm”
4.2.5.1.1 Disarm Abort Window Dialer Delay “In the Event of a Burglary Alarm”
4.2.5.1.2 Abort Abort Window Dialer Delay “In the Event of a Burglary Alarm”
4.2.5.2 Alarm Transmission Abort Window Dialer Delay “In the Event of a Burglary Alarm”
To Next Page
Loading...
Need help?
General
