Nortek 2GIG GC3e Series - Replace the Gc3 E Cellular Radio Module

Copyright © 2019 Nortek Security & Control LLC
78
2. From the System Settings menu, tap Cell Radio
Swap.
Cell Radio Swap
3. Tap Begin.
Begin
4. Remove the hinged door from the GC3e Control
Panel.
Remove Hinged Door
4. Select the Edit icon for Gateway and enter the
desired Gateway Address.
Gateway Address
5. Select the Edit icon for DNS Server and enter the
desired DNS Server Address.
6. Tap Confi gure Network Settings.
Replace the GC3e Cellular Radio Module
After your system is installed, if your dealer supplies you
with a new 2GIG cellular radio module, you can use the
following instructions to install it into your GC2 Control
Panel.
To replace the Cellular Radio Module into a system:
1. From the Home screen, tap System Settings.