Copyright © 2019 Nortek Security & Control LLC.
79
5. Pull the tab to remove the Cellular Radio Module.
6. Insert the Cellular Radio Module until it clicks into
place and select Done.
Select Done
The following screen appears when the module is
inserted and syncing with the system.
Working
7. Press Radio Test.
Radio Test
8. Press Start Radio Test.
Start Radio Test
9. Confi rm successful radio test.
Confi rm Test Successful
10. (Optional) Install the lock on the Cellular Radio
Module bay door. See “(Optional) Lock/Unlock the
Cellular Radio Module Door” in the section that
follows.
11. Replace the hinged door.
12. Tap Done.
To Next Page
Loading...
