Copyright © 2019 Nortek Security & Control LLC
24
Force Bypassing a Sensor
If you want to arm the system and ignore the open
sensor, you must bypass the sensor. This is called “force”
bypassing a sensor.
To force bypass the sensor:
1. Below the Sensors Not Ready list, tap Bypass All.
Sensors Not Ready > Bypass All
2. At the Enter your code to bypass sensors screen,
enter an active user code.
Enter the Master Code to Bypass Sensors
3. When the system status message changes to
System Ready to Arm (BYPASS), you can arm the
system. See “Arm the System.”
Canceling a Bypassed Sensor
To remove a sensor from the Bypassed Sensor list:
1. Tap the circle indicator showing how many devices
are currently bypassed.
Bypassed Sensors Indicator
2. Below the Bypassed Sensors list, tap Cancel
Bypass.
Bypassed Sensors > Cancel Bypass Button
3. At the Enter your code to cancel bypass screen,
enter an active user code.
Enter Your Code to Cancel Bypass
To Next Page
Loading...
