Copyright © 2019 Nortek Security & Control LLC
64
2. Tap Replace.
A Listening For Replacement Device screen
appears.
Smart Home Devices – Listening For Replacement Device
3. Walk to and trigger the replacement device on the
network. For example, if you are replacing a Z-Wave
light bulb, turn the light bulb ON.
A confi rmation dialog appears when the replacement
is fi nished.
Smart Home Devices – Replacement Finished
4. Tap OK to close the confi rmation dialog.
5. Tap to return to the Smart Home Settings
menu.
Associating Z-Wave Devices
The Association function provides a means of enabling
individual network devices to communicate directly with
each other.
To associate Z-Wave devices:
1. At the Home screen, tap System Settings.
Home—System Settings
2. Enter the Master User Code to access the System
Settings screen.
Enter Master User Code
To Next Page
Loading...
