Copyright © 2019 Nortek Security & Control LLC.
7
»
Removable Faceplate: A removable faceplate concealing a door lock for the Cellular Radio Module bay.
»
Microphone and Speaker: A built-in microphone and speaker provide clear 2-Way Voice communication during
alarm events between users at the GC3e Panel and operators at the Central Station.
»
Cellular Radio Module with Internal Antenna: A snap-in Cellular Radio Module with an internal antenna that fi ts
neatly in the side panel.
»
24-Hour Backup Battery: A 24-hour backup battery to support the GC3e Panel during temporary AC power
failures and outages.
»
USB Port: A convenient USB port at the top of the GC3e Panel that can be used with a USB thumb drive (not
supplied) to update the system’s fi rmware. See “Update the GC3e Panel Firmware.”
»
WiFi: The built-in WiFi module allows the system to be connected to a WiFi network for dual path communication,
OTA updates, and connection with secondary keypads.
»
Ethernet: (optional) An Ethernet module can be added to the system to allow for a hardwired connection to a local
network for dual path communication, OTA updates, and connection with secondary keypads.
»
Access Point: The built-in Access Point allows for a direct connection with secondary keypads via WiFi without
the need to connect to a local network.
Capabilities
The system includes these capabilities:
»
Smart Areas: (Optional) The system supports a Maximum of 4 Smart Areas. Zones may be assigned across
Smart Areas to allow for independent control.
»
Security Codes: The system supports a maximum of 100 unique, programmable, security codes for accessing
system functions. You are provided with one (1) Master User Code, one (1) Duress Code, and one (1) Installer
Code (reserved for use by 2GIG alarm dealers and installers), and the ability to create 98 additional user codes for
accessing the system.
»
Z-Wave® and Z-Wave Plus™ Compatibility: Installers (and end users, if confi gured on the system) can add up
to 232 smart home devices to communicate with the GC3e Panel using the Z- Wave and Z-Wave Plus wireless
communication protocol. The GC3e Panel can be included and operated in any Z-Wave network with other Z-Wave
certifi ed devices from other manufacturers and/or other applications. All non-battery operated nodes within the
network will act as repeaters regardless of vendor to increase reliability of the network. This device is a security
enabled Z-Wave Plus product that is able to use encrypted Z-Wave Plus messages to communicate to other
security enabled Z-Wave Plus products.
»
2-Way Voice: (Optional) Operators at the Central Station can communicate directly with end users through the
GC3e Panel . Operators can also silently listen-in after receiving a user duress report.
»
Date, Time, and Weather Forecasts
1
: Users can view the current date, time, and weather forecast in an easy-to-
read format.
»
System Vocabulary/Voice Descriptors: A list of vocabulary words integrates with the on-screen user interface
and audio announcements. This lets installers customize the sensor names that display on the GC3e Panel , as
well as for the audible system announcements. For example, when someone opens the front door, the system can
be set up to announce “front door.”
1
Date, Time and Weather Forecasts are supported by most Remote Service Providers in most regions. Consult your provider to determine if this feature is enabled.
To Next Page
Loading...
Need help?
General
