14 Maintenance Commands
297-6201-501 97Q3 Standard 02.01 July 1997
Testing Commands
User Security Commands
Command Name Explanation
DISKTEST Performs a built-in disk test on
the Active Processor.
DPRTST Performs a Dual-Ported Random
Access Memory test valid only on
the Standby Processor.
Command Name Explanation
MPRI C cccccc x Changes user priority of a selected
command.
MPRI E cccccc Displays the user priority of the
selected command.
cccccc - command to be changed.
x - priority level: 1-3.
Note: The following commands must be used while in the PSWD>
overlay.
PSWD(cr) Enters the PSWD> overlay.
A nnnnnn p Adds a new password to the system.
uC nnnnnn p Change a currently assigned password
or priority level.*
uD Delete the selected user number pass-
word (#=0-9)
u - user number.
nnnnnn - 6 char alphanumeric pass-
word.
p - priority 1-3 (1 - lowest,
3 - highest).
L Displays the user passwords and the
associated priority level.
Note: After using any of these commands, type (CTRL)Z to get out of
the PSWD> overlay.
To Next Page
Loading...
