iii
BMC II BISYNC Quick Reference Guide
Publication history
May 1996
Standard 01.01
July 1997
Standard 02.01.
• Integrated the new Quick Reference Guide template into this document.
• Added DMS-10 and DMS-100 software and firmware files reference
table to BMC II BISYNC Figures.
• Modified Maintenance Commands with commands left out of first
issue:
—BVAL
— RMID.
• Added a disk drive size and related number of tracks table in Mainte-
nance Commands.
• Added a CMD and STA code descriptions table to the TEC/DSI Com-
mands subsection of Maintenance Commands.
• Removed the Bus Terminator PCA from the list of valid PCAs in the
Miscellaneous PCA Replacement Procedure.
• Added notes regarding the location of the defect map and HEAD and
CYLINDERS out of range to step 9 of the Install replacement disk
drive procedure in the Disk Drive Replacement Procedure.
• Added note concerning the placement of the J5 jumper to step 8 of the
Disk Crossover PCA Replacement Procedure.
• Added the following to the PCA Switch and Strap Settings:
— CPU LED display codes table
— Disk Interface PCA table.
• Modified statements in various sections concerning firmware to verify
file name and release level prior to installation of replacement PCA.
• Modified PCA options statements in various sections to refer to the
PCA Switch and Strap Settings to verify settings prior to installation.
• Corrected various minor format and content errors throughout the docu-
ment.
To Next Page
Loading...
