1200 Series Display, Rev. A2 Using the Setup Menu — Page 11
Image adjust
Used to adjust image-related parameters such as image posi-
tion, size, and color/tint levels manually.
Reset to RGB Default causes the display to re-calibrate its
colors automatically when displaying an image from the
data input. When displaying a new VGA data source for
the first time, this calibration helps set colors properly.
OSD Menu
This line provides adjustments to the Setup Menu screen
such as position, time-out, etc.
System Info
This line provides information such as input resolution, etc.
Extended Menu
These settings should not be changed.
Exit Menu
Press while on this line to exit the Setup Menu.
As a shortcut, you can also hold down until the Setup
Menu disappears.
VIDEO
MENU
To Next Page