Northstar Explorer 557/567 Installation and Operation Manual
13
2-7 Simulate mode
In Simulate mode, the 557/567 ignores data from
the GPS antenna and other transducers and
sensors and the 557/567 generates this data itself.
Otherwise, the 557/567 functions normally.
There are two simulate modes:
Normal: Allows a user to become familiar
with the 557/567 off the water.
Demo: Simulates a boat moving along a
route and automatically displays different
557/567 functions.
To start and stop Simulate mode, and for more
information, see section 15-13. In simulate mode,
Simulate or Demo flashes at the bottom of
the display.
2-8 The main windows
!
WARNING
Never have Simulate mode on when the
557/567 is navigating on the water.
The display menu allows quick access to the
main windows and favorites. Full-screen Chart
is at the top of the menu followed by favorites.
Other windows are available from the
More…
sub menu.
Note:
The windows available depend on the optional
sensors and instruments that are installed (see
section 1-1).
To Next Page
Loading...
