NorthStar EXPLORER 557 - Setup Option Menus Overview; General, System, Chart, GPS, and Fuel Setup; Track, Favorites, AIS, Logs, and Alarms Setup; Units, Comms, Calibrate, Time, and Simulate Setup

Northstar Explorer 557/567 Installation and Operation Manual
48
SmartCraft™
(see the SmartCraft™
Gateway Installation
and Operation Manual)
Setup option menus
Factory default settings are shown. The setup data available will depend on the optional sensors and
instruments installed.
System
(see 15-1)
Alarms
(see 15-8)
Water (see 15-2)
Other (see 15-2)
Land (see 15-2)
AIS
(see 15-6)
Calibrate
(see 15-11)
General (see 15-2)
Chart
(see 15-2)
Comms
(see 15-10)
Fuel
(see 15-4)
GPS
(see 15-3)
Logs
(see 15-7)
Simulate
(see 15-14)
Track
(see 15-5)
Time
(see 15-12)
Units
(see 15-9)
Favorites
(see 15-13)