Notifier AFP-200

106 AFP-200 Instruction PN 15511:F2 10/11/99
2 ENTER
NORMAL HEAT(ANALOG) DETECTOR ADDRESS 32 Z32 Z Z Z Z 08:10A 08/20/97 D06
NORMAL MONITOR MODULE ADDRESS 02 Z01 Z Z Z Z 08:10A 08/20/97 M02
OFF BELL CIRCUIT PANEL CIRCUIT NO.3 Z00 Z Z Z Z 08:10A 08/20/97 M02
2 ENTER
****************************** EVENT HISTORY START***************************
ALARM: HEAT(ANALOG) DETECTOR ADDRESS 55 ZONE 55 3:10A 04/20/97 D55
ALARM: SMOKE(PHOTO) DETECTOR ADDRESS 29 ZONE 01 3:15A 04/20/97 D29
ACKNOWLEDGE 3:16A Fri 04/20/97
SYSTEM RESET 3:17A Fri 04/20/97
******************************* EVENT HISTORY END ***************************
4 ENTER
PRIOR
PRIOR
ACKNOWLEDGE 3:16A Fri 08/20/97
ALARM: SMOKE(PHOTO) DETECTOR ADDRESS 29 ZONE 01 3:15A 08/20/97 D29
SYSTEM RESET 3:17A Fri 08/20/97
Read All Points displays a list of all points programmed in the system. This list will display the status of all
addressable detectors, modules, panel circuits, system parameters and software zones.
History-Step allows the user to step through the history buffer using the PRIOR and NEXT keys. The first event
displayed is the most recent event.
Pressing the PRIOR key allows the operator to step back in time, one event at a time.
History-All sends the entire history buffer to be the CRT, from oldest event to newest.