Notifier NFS-640 - Set the Pre-Alarm for Alert or Action

Appendix C: Remote Terminal Access Using the CRT-2 for Alter Status
78 NFS-640 Operations Manual P/N 51334:B 10/03/2003
Set the Pre-Alarm for Alert or Action
Set Action/Alert lets you set the Pre-Alarm for Alert or Action. For example, Change Pre-Alarm from
“Alert” to “Action” as follows:
Press
5 W
Set Pre-alarm Alert(NO)/Action(YES). Type N or Y then Enter
STATUS CHANGE Change Alert/Action 09:37A Wed 07/07/99
y W
Press
Pre-alarm now set for ACTION
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com