the back of the device facing up), the
connector will insert into the left side of
Charging the Device and Amplifier
We suggest charging both the device and amplifier each night. The red
battery indicator next to the amplifier’s charger connection should be
on while charging and will flash when it is fully charged.
1. Tap the power button to turn off the display light.
2. Plug the charger’s connectors into the device and amplifier.
3. Plug the other end of the charger into a wall outlet.
When the device and amplifier are fully charged:
1. Unplug the connectors from the device and amplifier.
2. Unplug the charger from the wall outlet (optional).
3. Tap the device’s power button to turn the display on.