Mounting Bracket Not Used
If a mounting bracket is not used, you can mount the device using cable ties by fastening it directly to
the vehicle. The MT 4100 case includes molded channels, as shown in the following image, to help
secure it to a stable structure or wire bundle. The recommended cable tie size is 0.19” wide (4.75 mm).
Device Orientation
The MT 4100 has an accelerometer auto-calibration procedure that orients the device to the vehicle’s
direction of travel.
NOTE: For the accelerometer to operate properly, you must mount the MT 4100 securely. The
accelerometer may report inaccurate results if you mount the device to cable runs or other structures
that may shift the device's orientation.
For more information, see Novatel Wireless document Accelerometer Guide Application Note
(ENF0000AN003).
MT 4100 User Guide 24
To Next Page
Loading...
