Novatel MT 4100 - Device Mounting and Installation

MT 4100 User Guide 21
Device Installation
There are several considerations for mounting and installing the MT 4100 device such as determining
the mounting location within the vehicle, the type of mounting method to use, and best device position
and orientation. This section covers each of these considerations and includes installation steps along
with precautions and guidelines.
l Precautions and Guidelines
l Mounting Locations
l Mounting Methods
l Device Orientation
l Mounting and Installing the Device
Precautions and Guidelines
As you determine the mounting location and prepare to install the device, be sure to heed the following
precautions and guidelines:
l
Use a qualified Automotive Electronics Installer to perform the installation.
l
Perform a basic vehicle functionality check before starting the installation.
l
Mount all components properly or attach to the vehicle in a way that does not interfere with the
normal operation of the vehicle.
l
Never mount the MT 4100 in the engine compartment, directly on top of the AM/FM radio, by
any moving parts, or in a location that would be exposed to the elements.
l
Choose a location where metal or cable bundles do not shield the device.
l
Do not mount the device near or in the path of the vehicle's airbag.
l
Route all device cabling away from vehicle components where it could cause RFinterference,
such as radio, speakers and speaker wires, and GPS.
l
Choose a location where the device can be positioned so that the correct side has the best
unobstructed path to the sky (see label instructions).
l
Protect cabling through the vehicle chassis against spurs and nicks.
l
Do not mount the device where any excessive heat is generated by the vehicle or vehicle
components.
l
Solder all splice connections to ensure optimum reliability.
l
Make all I/O connections prior to connecting the device to vehicle power.