Novoferm DCC-80

To Previous Page

Novoferm tormatic GmbH

Eisenhüttenweg 6

44145 Dortmund

WN 905012-04-6-50 09-2024

Main Page

Table of Contents2
General Information3
Contents and Target Group3
Illustrations3
Explanation of Symbols3
Safety3
Intended Use3
Foreseeable Misuse4
Personnel Qualifications4
Potential Hazards Associated with the Product4
Product Description5
Rating Plate5
Technical Data5
Assembly and Installation6
Preparing for Installation6
Opening and Closing the Housing Cover6
Mounting the Door Drive6
Electrical Installation6
Programming with IPD-E9
Basic Programming Procedure9
Menu 1 Setting the Door End Positions9
Menu 2 Radio Settings9
Menu 4 Force Setting Opening, Menu 5 Closing10
Menu 6 Selection of Closing Edge Safety Device10
Menu 7 Selection of the Photoelectric Sensor10
Menu 8 Selection of the Roll-Up Protection Mechanism10
Menu 9 Selection of the Door Profile10
Menu 10 Default Settings10
Program Overview Basic Programming IPD-E10
Programming with IPD-S11
Programming Procedure11
Menu 3 Basic Settings and Initial Operation12
Menu 4 Further Door Settings13
Menu 5 Various Settings13
Menu 6 Radio Settings14
Menu 8 Profile Settings14
Menu 9 Service15
IPD-S Program Overview15
Initial Operation18
Operation19
Safety Instructions for Operation19
Dead man OPEN / CLOSE19
Pulse OPEN / Pulse CLOSE19
Automatic Return (AR Mode)19
Prioritised Input J30 (Optional) - Emergency Operation19
Mutual Locking (Optional)19
Lighting and / or an Advance Warning Light (Optional)19
External Control Devices19
Radio Hand-Held Transmitter (Optional)19
Emergency Operation20
Troubleshooting20
Maintenance22
Tasks to be Performed before Starting Maintenance22
Maintenance Release (Variant-Specific)22
Inspection22
Disassembly26
Disposal26
Declaration of Conformity and Incorporation26
Declaration of Incorporation in Accordance with the EC Machinery Directive 2006/42/EC26
Declaration of Conformity According to Directive 2014/53/EU26
Figures27

Novoferm DCC-80 - Page 33

Table of Contents