NV-DVR1104/CD, NV-DVR1108/CD and NV-DVR1116/CD ver. 1.1 - user's manual
All rights reserved © NOVUS Security Sp. z o.o.
27
(5) ALARM DISPLAY MODE: If this option is set to ON, alarm camera will be displayed in
fullscreen mode. If this option is set to OFF in case of alarm
detection all cameras will be displayed in the same mode as before
the event;
(6) MOTION EVENT: If this option is set to ON each motion detection is noted in system
registry. If this option is set to OFF motion detection function and
alarm recording are active but there will be no event notice in
system registry;
(7) EXT. ALARM RELAY.: if this option is set to ON alarm relay will be activated in case of
external alarm;
(8) VIDEO LOSS RELAY: if this option is set to ON alarm relay will be activated in case of
video loss
(9) MOTION RELAY: if this option is set to ON motion relay will be activated by
motion detection in camera with active motion detection function;
DEVICE MENU
To Next Page
Loading...
