Novus NV-DVR1104/CD - Motion Detection

NV-DVR1104/CD, NV-DVR1108/CD and NV-DVR1116/CD ver. 1.1 - user's manual
All rights reserved © NOVUS Security Sp. z o.o.
22
4.3 Motion detection
In MOTION DETECTION menu following settings can be set individually for each video channel:
(1) CAMERA this option is used to select specific channel number for the camera of
which settings should be displayed or modified;
(2) MOTION DETECT when this option is set to ON any motion detection in camera image
activates alarm mode. in Alarm recording mode camera name is
displayed in yellow color. When this option is set to OFF motion
detection is not analyzed and all remaining menu lines are not
displayed;
(3) BUZZER when this option is set to ON and motion is detected, sound signal is
activated;
(4) SENSITIVITY
This option allows to define the sensitivity of motion detection. It helps
to evade (avoid) unnecessary false alarms caused for example
by moving leafs etc.. This option can be adjusted in the range from 1
to 100. The higher value of motion detection makes it more sensitive;
DEVICE MENU
▪ CAMERA CAM1
▪ MOTION DETECT ON
▪ BUZZER OFF
▪ SENSITIVITY 050
▪ AREA SETUP [ 
 
 ]
▪ EXIT
MOTION SETUP
ENTER -SET    
       
    MENU EXIT