NV-DVR1104/CD, NV-DVR1108/CD and NV-DVR1116/CD ver. 1.1 - user's manual
All rights reserved © NOVUS Security Sp. z o.o.
36
5.2 Schedule recording
NV-DVR1104/CD, NV-DVR1108/CD and NV-DVR1116/CDrepresents schedule recording function
with various recording modes during the day.
CAUTION: To activate schedule recording set to ON in SCHEDULE RECORDING option in
RECORD menu.
Schedule recording can be set individually both for working days and for weekend. Schedule recording
can be run with various parameters during the day. Recording mode can be adjusted individually
according to working hours of monitored objects.
Images quantity refers to RECORD QUALITY settings in RECORD menu, irrespective to recording
mode.
When setting recording modes and during device operation, following letters are used:
O - this option is used for continuous recording
|A| - this option is used for alarm recording
|X| - this option is used when recording process does not occur
Programming of schedule recording is described in following example.
EXAMPLE
According to working hours in monitored object continuous recording will be run with 25fps recording
speed from 8am to 4pm for each working day. Motion detection and alarm events will not influence on
recording speed. After working hours device will switch into alarm recording mode; recording will be
run with 50 fps recording speed.
On Saturday and Sunday device will record only in alarm mode with 50 fps recording speed.
Please, select WEEKDAY shortcut using cursor buttons . Selected position will be highlighted
with yellow color. Using cursor buttons MON position should be set. Than second shortcut
should be set as FRI. In START-STOP position start hour should be set as 08 and end hour should be
set as 16. Proceed to TYPE column and select O. P/S column should be set to 25P, and ALARM
P/S column should be set to 50P.
RECORDING
To Next Page
Loading...
