NV-DVR1104/CD, NV-DVR1108/CD and NV-DVR1116/CD ver. 1.1 - user's manual
All rights reserved © NOVUS Security Sp. z o.o.
26
DEVICE MENU
4.5 Alarm setup
In ALARM SETUP menu following settings can be adjusted:
(1) BUZZER/ALARM DWELL: this option is used to set buzzer dwell time after alarm
detection;
(2) VIDEO ALARM LOSS: when this option is set to ON sound signal is activated
whenever signal from camera is lost;
(3) AUDIBLE ALARM: when this option is set to ON sound signal is activated; if this
option is set to OFF sound signal stays inactive;
(4) EXT.ALARM MODE.: this option is used to suit alarm outputs to external devices.
When NC option is selected alarm signal is activated by
alarm circuit openly. This solution is used in connection with
passive motion detectors. When NO option is selected alarm
signal is activated by alarm circuit closely. this solution is
used in connection with various switches, reed relays, etc;
BUZZER
▪ BUZZER/ALARM DWELL 05SEC
▪ VIDEO LOSS ALARM ON
▪ AUDIBLE ALARM OFF
▪ EXT. ALARM MODE N.O.
▪ ALARM DISPLAY MODE DISABLE
▪ MOTION EVENT OFF
RELAY
▪ EXT. ALARM RELAY ON
▪ VIDEO LOSS RELAY ON
▪ MOTION RELAY ON
▪ EXIT
ALARM SETUP
ENTER -SET
MENU EXIT
To Next Page
Loading...
