Novusun CNC NCH02 - Page 10

Chapter2 Connection
Manual of NCH02
- 8 -
R 4 C 1
SPINDLE
1：Start and Stop Spindle
R 4 C 2 A- 1：A axis manual reverse；2：Probe；3：Number 1；4：
Move left
R 4 C 3 Y+ 1：Y axis manual forward；2：Select Y axis；3：Number
2；4：Move up
R 4 C 4 X+ 1：X axis manual forward；2：Select X axis；3：Number
3；4：Move left
R 5 C 1 START 1：Start the G code
R 5 C 2 PAUSE 1：Pause the G code
R 5 C 3 Y- 1：Y axis manual reverse；2：Number 0；3：Move down
R 5 C 4 STEP 1：Switch step/ continuous/MPG ；2：Number “.”
R 1 C 4 PUSH PUSH 1：Increase the number clockwise；2：Decrease the
number Counter-clockwise；3：Confirm when push
Table 2-1. Keyboard definition
www.nvcnc.net