Preparations for Use
20
WARNING
NSK recommends to always activate both functions of " Contra-Restriction" and "Contra-SAFE" because using
these functions under “Off” or “No stop” may increase the probability or severity of overheating of defective or
poorly maintained handpieces.
NOTICE
Set the lower air pressure limit at motor start-up, lower than the upper air pressure limit at maximum
rotation of the motor.
7
After you are finished making changes, hold down the
Mode Key again for more than two seconds to return to
the regular screen.
7
NOTICE
Notifying sound will not be generated when the sound volume is set to OFF. Be aware of this while using the
system when the sound volume setting is OFF.
<Notifying sound during key operation>
Items Notifying sound
When turning on the power 1 short beep
When turning off the power 1 short beep followed by 1 long beep
When pressing the keys 1 short beep
When pressing and holding the Speed Key/Torque Key
1 short beep followed by successive short beeps while
the key is being pressed.
When reaching upper/ lower setting limit, when
becoming inoperable
3 short beeps
When switching to the function setting mode 1 long beep
When storing into the memory 2 short beeps
To Next Page
Loading...
