English
Operation Procedure
33
4-5
Sound Volume (When the load exceeds the set torque limit value, Error etc.)
1
Press the Volume key.
Volume: High
Volume: Low
Volume: OFF
1
<List of Notifying Sound>
Type Notifying Sound
Rotary Endo Mode
When reaching 75% of the torque setting Melody 1
When reverse rotating Melody 2
Alarm sound for when the motor or a handpiece is overheating. Melody 3
When the motor/ handpiece is not functional, meaning the checking result of
the handpiece is “NG (blinking)”
Turning ON the power while pressing the foot pedal of the dental unit
A set of 3 short beeps continues to
sound.
When an error is generated: 1 short beep followed by 1 long beep.
CAUTION
Notifying sound will not be generated when the sound volume is set to OFF. Be aware of this while using the
system with the sound volume set to OFF.
To Next Page
Loading...
