NTI FTVN - Page 41

41
Part 1 - General Safety Information Part 5 - Venting
NOTE: These drawings are meant to demonstrate system venting only. The installer is responsible for all equipment and detailing required by local
codes.
Sidewall Venting Options - Direct Vent Installation
Two Pipe Termination
Low Prole Termination
Concentric Termination
Gas Vent Directly
Below Keep Free of
Obstructions
Gas Vent
Directly
Below Keep
Free of
Obstructions
Gas Vent
Directly
Below Keep
Free of
Obstructions
Gas Vent
Directly
Below Keep
Free of
Obstructions
4 in min.
Refer to documentation included with termination kit for complete
installation instructions.
Refer to documentation included with termination kit for complete
installation instructions.
Refer to documentation included with termination kit for complete
installation instructions.
WARNING
WARNING
WARNING
Figure 27 - Two Pipe Sidewall Venting Detail
Figure 29 - Sidewall Concentric Termination (with Optional IPEX kit)
Figure 28 - Low Prole Sidewall Termination (with Optional IPEX Kit)
Figure 30 - Sidewall Concentric Termination
(with Optional Duravent / InnoFlue Kit)