EasyManua.ls Logo

NTI GF 200 - Troubleshooting Procedures; Troubleshooting: Circulation Pump Error (E.438)

NTI GF 200
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.5 Installation Check list
After installing the appliance, review the following checklist. You should be able to answer Yes” to all of
the items in the checklist. If not, review the appropriate sections to complete the installation. If you have
additional questions or need assistance with installation, contact Technical Support at 1-800-688-2575.
The following check list is intended to supplement those found in the water heater manual, and focuses on
installation details specic to the overall appliance.
35
Venting the Water Heater Yes No
Have you vented the water heater using the correct temperature rated materials for the maximum space heating
setpoint?
Connecting the Power Supply Yes No
Is the supplied voltage 110-120 V AC?
Have you installed a power switch to facilitate end-user maintenance?
Have you checked the polarity of the electrical connection?
Setting the DIP Switches Yes No
Have you veried the positions of all DIP switches on the interface board?
Have you veried the positions of all DIP switches on the front panel?
Operating the Appliance Yes No
Have you given both Installation Manuals and the water heater Operations Manual to the owner for future
reference?
Have you shown the owner how to clean/replace the return air lter?
Water Heater Checklist Yes No
Have you completed the Installation Checklist in the Water Heater Installation Manual?
Ducting the Appliance Yes No
Have you set the appropriate cooling ow rate for the installation?
Have you installed a return air ltration system?
Plumbing the Appliance Yes No
Have you installed a thermostatic mixing valve on the appliance hot water outlet?

Related product manuals