8 - 52 en-938821/2
Display of the "UTILISATION IMMEDIATE DES MODIF." page and the message:
WARNING! SHUT DOWN THE POWER
OK? (Y/N):
Modifications applied immediately Delayed application
Shut down the power
Confirm immediate use Delay application of the modifications
☞
Y
☞
N
The system is reset. Return to the "UTILITIES PRESENT" menu.
The modifications are not applied until the system
is reset.
8.9.1 Checking the Job Reference
Requirements
"S/W OPTIONS SETUP" menu displayed (See 8.9).
Actions
Select "AFFAIRE No." (job reference). ☞
)
0
Display of the "JOB REFERENCE AND IDENTIFIERS" page.
. . / . . EXIT
JOB REFERENCE AND IDENTIFIERS
JOB REFERENCE : XXXXXX 00
EEPROM SOFTWARE : SIMU EEP
CNC SOFTWARE : 202606C1
USER PLC SOFTWARE : XXXX
PARAMETERS TABLE : F8
OK (Y/N) ?❚
The job reference corresponds to that mentioned on the customisation grid:
Validate the page. ☞
Y
Return to the "S/W OPTIONS SETUP" menu.
To Next Page
Loading...
