20
Always ensure the top (waste) tank is empty of water BEFORE lifting.
Contents:
1 x Operator Manual
1 x Battery Charging Lead
2 x Keys
2 x 50 Amp Fuses (1 spare)
1 x Maxi Fuse-puller
Lift top tank assembly to reveal battery compartment, ensuring you use the handle grip provided (Fig.1).
Fit battery fuse (contained in start-up pack) into the battery fuse holders as illustrated (Fig.2).
A small spark is usual when putting the fuse into the holder.
Note: Wear suitable gloves when inserting fuses.
Ensure the Emergency Stop button is released (Fig.3).
Insert key into main control (on / off) and turn quarter-turn clockwise to position (1) ‘On’ (Fig.4).
Ensure that the forward / reverse switch is set to forward position (Fig.5).
Select the slow speed setting (Fig.6).
Depress control handle with both hands and slowly drive machine off of the pallet (Fig.7).
this control panel has been designed with a built in variable speed start / stop trigger.
When the machine is removed and in a safe position, turn key back to the position (0) ‘OFF’ (Fig.8).
Use handle grip when
raising or lowering the
top waste-tank.
Quick Set-Up Guide
PLEASE READ BEFORE COMMENCING ANY OPERATION.
AFTER THE REMOVAL OF ALL THE PACKAGING,
CAREFULLY OPEN AND CHECK THE CONTENTS OF THE START UP PACK.
!!
Note: Ensure that no metal objects come into contact with battery terminals while the batteries are exposed.
When inserting the rst fuse you may notice a spark, this is normal.
To Next Page
Loading...
